The SINUMERIK Data Recorder signal configuration requires the Connector configuration. To obtain this configuration, the Connector ID (see the connector manuals) and the IE Databus credentials must be correctly filled in on the "Connection" tab of the "Configure Settings" page of the SINUMERIK Data Recorder user interface.
For SINUMERIK Data Recorder to function properly with the correct configuration, the Connector and the IE Databus applications must be installed on the IED and operating with the correct configuration. For detailed information, refer to the section “Configure Settings”.
Requirements
The following requirements must be met to configure the application:
The SINUMERIK Connector application and all its dependencies are installed on the Industrial Edge Device and correctly configured.
The IE Databus application is installed on the Industrial Edge Device and correctly configured.
For the IE Databus, the necessary users, privileges and credentials are defined properly.
Procedure
On the application’s homepage, click on the tile "Configure Settings” to open the “Settings" editor.
Go to the “Connection” tab.
Enter the ID of the SINUMERIK Connector into the "Connector ID" field.
Optionally, enter the machine name into the "Machine name" field to distinguish connected SINUMERIK NCU.
Optionally, enter the machine serial number into the "Machine serial number" field to distinguish connected SINUMERIK NCU.
Enter the IE Databus username in the "Databus username" field.
Enter the IE Databus password in the "Databus password" field.
Enter the MQTT topic in the "Global MQTT topic" field.
Click on the "Save" button to save the configuration.
Once you provide and save these mandatory settings, the application will be able to connect to the IE Databus and retrieve required signals configurations. This is mandatory to create and configure jobs.