-
Plug the Service Stick USB to the IOT2050 Edge Device.
-
The IOT2050 Edge Device must be powered on or restarted depending on its current situation:
2.1. If the device is switched off, it must be powered on first then the Step 3 must be applied
2.2. If the device is up and running, it must be restarted as in Step 3
-
Press the 'Reset' button of IOT2050 Edge Device then keep on push 'User' button until you see the following message:
"User button pressed - booting from external media only"
-
Wait for the main menu of the Service Stick.
-
You may use UP and DOWN arrow keys to switch among the menu options. For selecting an item from the menu you must press Enter.
-
To "Wipe Data & Reinstall" the operating system on the device, topmost item must be selected.
-
For re-installation, appropriate .swu file must be present in the data part of the Service Stick USB
-
During the installation process, a dialog to inform about the progress will be shown as follows:
If Service Stick USB does not a have valid swu file for installation, an error dialog will be shown as follows
-
After successful completion, a progress dialog will be displayed as follows:
-
Press "Enter" to get back to the main menu.
-
To check and use the newly installed OS, restart of the device is recommended. For rebooting the device, "Power Management" option must be selected from the main menu
In the sub-menu "Reboot" option must be selected.
-
After the reboot operation the newly installed version of the OS can be verified as follows:
