Launching Common Connector Configurator - Manual - OPC UA Connector - Industrial Edge - Industrial Edge App

Perform below steps to launch Common Connector Configurator:

If you are using Configurator on IEM OS

1. Open IEM and login.
2. Click Data Connections.
   Data Connections page appears.
   
3. Click OPC UA Connector app tile.
   Launch App window appears.
   
4. Select the IED into which you installed OPC UA Connector app.
5. Click Launch.
   The Configurator page opens.

If you are using Management Application on IEM Pro , IEM V, and IEM Cloud

Management app installation

Management app can be installed the following way:

1. Login to IEM and open Edge Management.
2. Click Discover a new experience to switch to the new UI.
3. Navigate to the Applications section.
4. Find and select the Common Connector Configurator application.
5. Click Install to begin the installation.

For more details, refer Migration from configurators to Management Applications.

Perform below steps to launch Common Connector Configurator:

1. Open IEM and login.
   The IEM Launchpad appears.
   
2. Click Edge Management.
   The Edge Management page appears.
   
3. Click Discover a new experience.
   A new Page appears.
   
4. Click Data Connections.
   The Data Connections page appears.
   
5. Click OPC UA Connector app tile.
   Launch App window appears.
   
6. Select the IED into which you installed OPC UA Connector app.
7. Click Launch.
   The Configurator page opens.