Add tags - Manual - OPC UA Connector - Industrial Edge - Industrial Edge App

You can add a data point or tag from a data source in the OPC UA Connector. Data points are referred as Tags.

Prerequisite

• OPC UA Connector must be running
• A data source must be available

To add a tag to a data source, follow the below steps:

1. Open OPC UA Connector in Common Configurator.
   OPC UA Connector Overview page appears.
2. Click the Tags tab.
   The tags details opens.
3. Click icon to the right side of the data source.
   The Add Tag dialog box is displayed based on the selected data source as follows:
   

4. Update the following fields:
   

   Filed name	Details
   Name	Name of the tag.
   Comment	Add the comments if required.
   Address	Address of the data point in the controller or on the server.
   Data type	Specifies the data point type. For more information about data types, refer Data types.
   Array dimension	Not in use.
   Acquisition cycle	Specifies the acquisition cycle with which the data is sent to the Databus.
   Acquisition mode	Specifies the acquisition mode of the data.
   Access mode	Specifies the access mode of the tags.

   * Indicates that all fields are mandatory.

5. Click Save.
   Tag is added to the data source.