PLC variants supported with SLMP are:
- Mitsubishi iQR Services
- Mitsubishi iQF Services
You can configure these connections using the SLMP Connector. You can use the configured connections to transfer the measured value series of selected data points to the Industrial Edge Runtime of the respective Industrial Edge Device. The Industrial Edge Runtime sends this data to the Databus. You can then use the data collected via the Databus for your Industrial Edge App or other applications.
SLMP provides easy connectivity with third party PLCs communication channel for tags.
SLMP Connector works with Common Configurator for Industrial Edge. For more information on Common Configurator refer Common Configurator.
The SLMP Connector is an application that runs on the individual Industrial Edge Device. You can install the SLMP Connector on all Industrial Edge Devices that you want to connect to your controllers. The SLMP Connector sends the data point values imported from the controllers to the Industrial Edge Databus through the Industrial Edge Runtime.