Home page - Manual - SLMP Connector - Industrial Edge - Industrial Edge App - SLMP provides easy connectivity with third party PLCs communication channel for tags. You can use the configured connections to transfer the measured value series of selected data points to the Runtime of the respective IED. - Mitsubishi iQF Services - SLMP Connector - TIA Portal - Mitsubishi iQR Services

Open Common Configurator, go to Get Data > Connector Configuration.

The Common Configurator home page will be displayed as follows:

The Common Configurator page displays all the installed Connectors. If SLMP connector is installed, it will be displayed with the below details.

• Configured devices - displays the number of devices that are configured to the SLMP connector.
• Tags configured - displays the number of tags that are configured to the SLMP connector.
• Connected - shows connected state of the configured datasources.
• Disconnected - shows disconnected state of the configured datasources.

Import and Export: The Common Configurator allows you to import and export the configuration. This functionality is helpful when you want to use an existing configuration of one Industrial Edge Device (IED) in another IED. This enables to take the back-up of the configuration and restore it as required. You can export the configuration file from the required IED and import this configuration file in the desired IED where you want to use this configuration. The configuration file is a JSON file and is exported in .json format.