Procedure - Manual - SLMP Connector - Industrial Edge - Industrial Edge App - SLMP provides easy connectivity with third party PLCs communication channel for tags. You can use the configured connections to transfer the measured value series of selected data points to the Runtime of the respective IED. - Mitsubishi iQF Services - SLMP Connector - TIA Portal - Mitsubishi iQR Services

To configure Standard SLMP Connector data source, follow these steps:

1. Open SLMP Connector.
   The SLMP Connector "Overview" page is displayed.
2. Click the "Tags" tab.
   The "Tags" tab details are displayed.
3. Click "Add Data Source" in the upper‐right corner.
   The "Add Data Source" dialog box is displayed as follows:
   
4. From the "Select PLC Type" dropdown list, select the Mitsubishi iQR Series or Mitsubishi iQF data source.
   The fields are displayed as follows:
   

5. Complete the following fields:
   

   Field Name	Definition
   PLC type	Set the used PLC type.
   Name	Defines the name of the data source.
   IPv4 Address	Defines the IP address of the third party PLCs with the desired data points.
   IP Port Number	Set the port number of the module of the PLC as per your choice. Range is selected between 1-65534.

   * All the fields are mandatory.

6. Click "Save".
   The data source is added and displayed in the "Data Source" table.