Procedure - Manual - SIMATIC IPC AI Industrial Edge Device - SIMATIC - Industrial Edge - Security documentation for SIMATIC IPC

SIMATIC IPC AI IED-OS
Portfolio
Industrial Edge
Product
SIMATIC IPC AI Industrial Edge Device
Software version
v1.0
Edition
08/2024
Language
English

  1. Plug in the USB flash drive into your Windows PC.

  2. Open Create and format hard disk partitions via Start > Control Panel > System and Security > Administrative Tools.

  3. Check, if the USB flash drive has at least 1 GB unallocated space. If yes, proceed with Step 5. If not, remove other partitions/data in the USB flash drive. Disk Management overview

  4. To delete a partition, right click on the USB flash drive and click Delete Volume…. All files in the USB flash drive will be deleted after this session. Delete partition

  5. To create a new volume on your USB flash drive, right click on the unallocated USB space and select New Simple Volume…. Create new volume If the USB flash drive has more than 32 GB capacity, set Simple volume size in MB to less than 32768 MB (32 GB). Volume size

  6. Confirm your entries with Next until the Format Partition dialog.

  7. In the File system drop-down list, select FAT32. Format value

  8. Enter USBONBOARD in the Volume Label input field.

  9. Confirm your entries with Next and Finish.

  10. Copy the onboard configuration file into the USBONBOARD USB partition.