Known Issues - Manual - SIMATIC IPC IED-OS - SIMATIC - Industrial Edge

SIMATIC IPC IED-OS

Product
SIMATIC IPC IED-OS
Product Version
v2.2
Edition
07/2024
Language
en-US (original)

The following are the known issues:

Issue Troubleshooting
Connecting an Edge Device to the IEM fails and the "Nginx configuration test failed" error message is displayed during activating the Edge Device phase. Check the DNS server configuration since the error message is DNS server related. The DNS server must be configured properly and reachable for the IEM.
In case user data of edge device is corrupted due to unexpected power-outage or forcibly shutdown of edge device. IED-OS filesystem recovery process is going to take place. The process might take 2-3 hours depending on hardware specification of the running device. -
Sporadically, the Edge Device might stuck during the boot phase when you perform a firmware update. Switch off the Edge Device and switch the Edge Device on again manually. After switching on the Edge Device, the Edge Device will boot from the previous firmware version. After that, you can again trigger the firmware update process.