Procedure - Manual - SIMATIC IPC IED-OS - SIMATIC - Industrial Edge

SIMATIC IPC IED-OS
Product
SIMATIC IPC IED-OS
Product Version
v2.2
Edition
07/2024
Language
en-US (original)

  1. Copy the Edge Device configuration file on an USB flash drive. Ensure that just 1 configuration file is saved to the USB flash drive. Otherwise, the connecting process causes problems and fails.

  2. Insert the USB flash drive into the Edge Device. The connecting process is being started automatically. The Run LED flashes green and the Maintenance LED flashes yellow.

  3. Wait until the connecting process is completed. When the Edge Device is connected successfully to the IEM, the Run LED lights up green.

    Connection successful

    When the Edge Device is connected successfully to the IEM, the status indicator at the top of the Edge Device tile in the IEM switches to green and the IP address of the Edge Device is displayed under the name of the Edge Device.

To open the UI of the Edge Device, either click on the tile of the Edge Device, if the remote access is enabled, or enter the IP address of the Edge Device into your Internet browser. Use the HTTPS protocol, for example https://192.168.80.123.

Log files

During the connecting process, the conf-usb.log and services.log files are created in the USB flash drive. In case of any errors, open these log files in a text editor for detailed information. In addition, you can check the steps of each service, if it was successful or not, in the services.log file.