Mount the camera to the bracket
Camera – Smart Light mounting bracket Camera
Position/orient the camera inside the bracket so that the lens of the camera is pointing to the bottom of the bracket and the connectors are in the position as shown in the image below. Any other installation/orientation will cause improper operation of the system.
Connect the camera to the bracket using the 4 screws delivered with the camera, 2 on each side.
Mount the bracket to the Smart Light unit
Position the camera, while connected to the bracket so the lens of the camera is inside the Smart Light central hole and so that the bracket is directed to the Smart Light connectors as shown below.
Connect the bracket to the Smart Light using the 2 screws delivered with the Smart Light
Parent topic:Assembling and connecting the Siemens Inspekto VIS system