Ethernet IP Connector - Manual - Ethernet IP Connector - Industrial Edge - Industrial Edge App

• After deploying a new configuration, a reboot is performed automatically. Communication is interrupted during this time.
• The data type Raw is not supported.
• Reading and writing of arrays is not supported. The array elements must be added individually to enable reading and writing them.
• Multiple read operations per packet are supported for PLCs of the Control/Compact Logix series. Only single read operations are supported for other PLCs.
• User-Defined Types (UDTs) are not supported in this version. You must select each individual elements of a UDT structure.
• If too many tags are deployed and the required PLC performance is not available, not all tags are initialized. In this case, only the supported quantity of tags is initialized. You are informed of this in a status message or in the log files. The quality code of the tags that could not be initialized is set to bad. For example, if you deploy 1000 tags in a MicroLogix PLC with an acquisition cycle of 1 second, the PLC performance is strongly burdened and the connector allows only 100 tags.