Installing Ethernet IP Connector on the IED - Manual - Ethernet IP Connector - Industrial Edge - Industrial Edge App

Description

This section provides information on how to install an IE app from an IEM instance on an IED.

The installation steps are demonstrated in a video at the following link:

Requirement

The following requirement must be met:

• Access to the IEM instance in whose catalog the IE app to be installed is available.

Procedure

To install the IE app on the IED, follow these steps:

1. Open the IEM home page and log in.
2. Open the IEM catalog and click the app you want to install.
3. Click the Install button.
   The Install App dialog window is displayed. If you already have a configuration file, for example, a configuration file that you downloaded from another IED, you can upload it here.
4. Click Next.
   The Install App dialog window is displayed. If you already have a configuration file, for example, a configuration file that you downloaded from another IED, you can upload it here.
5. Select one or more IEDs on which you want to install the app. The devices must be switched on and online.
6. Select one of the following installation options:
   Click Install Delayed or Install Later to start the installation at a later time.
   Click Install Now to install the app immediately.
7. Click the Job Status tab to view the installation progress.

After the installation you can check to see which apps were installed on which IEDs under My Installed Apps.