Hardware requirements - Manual - Connector for IEC 60870-5-104 - Industrial Edge - Industrial Edge App - Connector for IEC 60870-5-104 transfers data from IEC devices over TCP/IP network to the Databus or IIH, allowing the values of these tags to be analyzed and visualized in applications like Performance Insight. - Connectivity suite connector - Connector for IEC 60870-5-104 - Data transfer - IEC 60870-5-104 - International Electrotechnical Commission - TCP/IP network

Connector for IEC 60870-5-104

Product
Connector for IEC 60870-5-104
Product Version
v1.0.0
Edition
12/2024
Language
en-US (original)
  • A device on which Industrial Edge Management (IEM) is running.
  • An Edge device (IED) that is compatible with IEM:
    • IED model: For example, SIMATIC IPC227E Nanobox, SIMATIC IPC427E, IPC127E, and IPC847E
    • Hard disk: At least 10 GB available
    • RAM: 2 GB RAM available
  • The Edge device must be onboarded to the IEM.

NOTE

IEM, IED, and web browsers must be synchronous in the UTC time zone.

Update of apps

  • If you update Common Configurator, also update the Databus.
  • If you only deploy tags directly to the IIH, the Databus is not required.

NOTE

The Databus Gateway app is now integrated into Databus app with the version 3.0.0. For more information, refer Integrating Databus Gateway app into Databus app starting from version 3.0