Starting Connector for IEC 60870-5-104 on the IED - Manual - Connector for IEC 60870-5-104 - Industrial Edge - Industrial Edge App - Connector for IEC 60870-5-104 transfers data from IEC devices over TCP/IP network to the Databus or IIH, allowing the values of these tags to be analyzed and visualized in applications like Performance Insight. - Connectivity suite connector - Connector for IEC 60870-5-104 - Data transfer - IEC 60870-5-104 - International Electrotechnical Commission - TCP/IP network

Connector for IEC 60870-5-104

Product
Connector for IEC 60870-5-104
Product Version
v1.0.0
Edition
12/2024
Language
en-US (original)

Description

This section provides information on how to start an IE app installed on the IED.

Requirement

The following requirement must be met:

  • Access to the IED on which the IE app is installed.

Procedure

To start an app, follow these steps:

  1. Open the IED home page and log in.
  2. Open the Apps tab.
  3. Launch Common Configurator app and open the Get Data tab.
    The Connector for IEC 60870-5-104 app appears in the available connectors list.
  4. Click Connector for IEC 60870-5-104 app to start configuring the data sources and tags.