Procedure - Manual - Connector for IEC 60870-5-104 - Industrial Edge - Industrial Edge App - Connector for IEC 60870-5-104 transfers data from IEC devices over TCP/IP network to the Databus or IIH, allowing the values of these tags to be analyzed and visualized in applications like Performance Insight. - Connectivity suite connector - Connector for IEC 60870-5-104 - Data transfer - IEC 60870-5-104 - International Electrotechnical Commission - TCP/IP network

Connector for IEC 60870-5-104

Product
Connector for IEC 60870-5-104
Product Version
v1.0.0
Edition
12/2024
Language
en-US (original)
  1. Open the Get Data tab.
    The available connectors are shown.
  2. Click the Connector for IEC 60870-5-104 tile.
    The Overview page opens.
  3. Click Add data source.
    The Add Data source page is displayed.
  4. Select IEC 60870-5-104 from the Communication Protocol drop-down list.
    The configuration options are displayed.
    Configure data source
  5. Enter the following information:

    Field name Description
    Name Defines the name of the data source.
    The name must be unique across all connectors.
    IPv4 address Defines the IP address of the device to be connected.
    The address format is decimal, e.g. 192.168.1.10.
    IP Port Number Defines the port of the IP address used to retrieve data. Range 0...65535, e.g. 102.
    COT size Defines the number of octets in an ASDU COT(Cause Of Transmission) field.
    The value of the COT size is 1 or 2.
    Response timeout (ms) Define the response timeout in ms.
    Default value is 5000 ms.
    Minimum value is 1000 ms.
  6. Click Save.