Deploy IEC 60870-5-104 tags in the Databus (Common Configurator) - Manual - Connector for IEC 60870-5-104 - Industrial Edge - Industrial Edge App - Connector for IEC 60870-5-104 transfers data from IEC devices over TCP/IP network to the Databus or IIH, allowing the values of these tags to be analyzed and visualized in applications like Performance Insight. - Connectivity suite connector - Connector for IEC 60870-5-104 - Data transfer - IEC 60870-5-104 - International Electrotechnical Commission - TCP/IP network

Connector for IEC 60870-5-104

Product
Connector for IEC 60870-5-104
Product Version
v1.0.0
Edition
12/2024
Language
en-US (original)

IEC 60870-5-104 tags are made available in the Databus after you have selected the corresponding option for selected tags.

Procedure

  1. Select the Publish to Databus option either for all IEC 60870-5-104 tags or the selected tags.
    Deploy tags
  2. Click Deploy.
    The configuration file for the Databus is created automatically.

Result

The IIH generates the configuration file for Connector for IEC 60870-5-104 in the background and sends it to Connector for IEC 60870-5-104. This defines which tags are available for the Databus. A connection is established by configuring the Databus.

The tags that were found by the Databus and forwarded to the Databus are subscribed to the Databus.

You can find the configuration files in the Management tab of the IED.

NOTE

Credentials for Databus

Enter the credentials for Databus in the settings to enable the connection to the Databus to be established. You can find additional information here: Entering credentials for Databus