In the Model converter page, you can add a trained model, set the conversion parameters, and convert the model for running on the target device.
① |
Current position |
② |
Tool bar |
③ |
General information for the trained model |
④ |
Conversions for the currently-selected trained model. You can add a new conversion by clicking "Add new conversion". |
⑤ |
Navigation bar |
⑥ |
Trained model list. You can add a new conversion by clicking "Add trained model". |
⑦ |
"Model conversion parameters" area |
⑧ |
"Converted model" area |
Prerequisite
You have a trained model on your PC.
Add a trained model
Navigate to the "model converter" page by clicking
.Click "Add trained model". The Imported trained model window displays.
Click "..." in the input box below "Trained model".
Browse to the folder in which you saved the trained model, then select the model.
Click "OK" to confirm.
Then you can see the model is added in the model list.
You can add more models by repeating step 2 to 5. You can add multiple trained models in a project.
You can use the following tools on the top-right corner to edit the added model:
 |
View the structure of the trained model |
 |
Delete the added model |
Set the model conversion parameters
Enter the required data area in the parameter set. The fields marked with "*" are required.
Scroll down to check all the parameters.
You can add a different parameter set by clicking "Add new conversion".
You can use the following tools when you set the model conversion parameters:
 |
Reset model conversion parameters |
|
Delete the current parameter set |
Convert model
After you set the model conversion parameters, click the Convert button to trigger the conversion.
Then you can see that the model you add is marked as ready in the trained model list. For information on the supported model, refer to Supported model framework .
Status of the conversions of the selected model ① Number of ready conversions ② Number of not converted conversions ③ Number of incompatible conversions ④ Number of incompatible non-converted conversions |
|
Status of the added model ⑤
|
Compatibility of the conversions and the model
If you changed the version of target device after the model conversion, the trained model or the conversion might not be compatible with the target device any more.
If the trained model is not compatible with the changed target device, the model will be marked as not compatible, and you cannot add conversion for this model any more.
If the trained model is compatible with changed target device, but the existing conversion(s) is/are not compatible with it. The existed conversion will be marked as not compatible, and you can add new conversion for the changed destination device.
You can use the following tools to edit the converted model:
 |
Convert the model again |
|
Delete the conversion |
 |
Check error log |
 |
Download the model |